K11 Water-Proof Paint (General Type) is formulated by combining high polymer waterproof emulsion, multiple inorganic materials and addictive agents proportionately. It is for common utility of water-proof purpose.
Exterior wall, basement, parking lots, balcony, bath room, interior floor for water-proof purpose.
Normal condition, 1.8-2.0kg/㎡, basement: 3.0-4.0kg/㎡ (the actual consumption is subject to the purpose, application areas, roughness of substrate and environment).
Excellent cohesive force. Apply decoration material directly after water-proof film fully dried
Desirable attachment between decoration layer and water-proof layer
Resist to alkali, freeze, artificial aging impacts and impermeable
Eco-friendly, easy application, obvious water-proof ability
Product physical-mechanical properties comply with JC/T2090 Standard.
Substrate should be clean, firm without dirt, oil stains or obvious droplets.
Mix the two components proportionately with the facility of slow agitator. Pour powder material into liquid material and fully stir for 2 – 3 min until no jelly with uniform size being spotted.
Application: use brush and roller, no leaking apply. For damp-proof purpose, one coat is enough. For water-proof purpose, 2 or 3 coats are needed. Recoat (second coat) until the first coat touch dried (normally 1-2hrs). Cross apply between two coats with the DFT of 1-2mm in total. Moisturize the previous coat if it is solidified.
Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.
Film maintaining: covering by wet clothing or spraying water (24 hrs after application) are suggested, normally lasts for 2 to 3 days. Keep ambient environment ventilated to shorter the processing time.
Use up the finely stirred product within 30min.
Add no more than 3% water thinner if the stirred product is too thick.
Maintain intermittent agitating to avert product sediment.
Gently pour the powder material into the liquid one (ratio, liquid material: powder material = 1:4 (weight)), fully stir for 2 – 3 min until no jelly with uniform size being spotted.
Other construction applications (e.g. decoration) should wait for 3-5 days after the water-proof application is accomplished at temperature between 5℃ and 40℃.
Do not apply in inclement weather conditions, such as rain, snow, sanding and windy day. In case of doing so, water maintaining after application is recommended.
Place in cool and well-ventilated areas at temperature between 5℃ and 40℃, and keep away from moisture.
The product is a non inflammable or explosive item that can use normal shipment. Avoid exposing to strong sunlight and freeze during shipment.