Stone Paint

Application Video

Product Present

Raw materials like premium emulsion polymer as binder, multiple color natural sand and other additives are selected to formulate this natural stone cover. It is natural, stable and magnificent, expressing the natural stone effect tremendously.

Application Scope

It can be applied to all flat substrates of construction exterior mineral wall, also is the ideal surface decoration solution of insulation system.

Product Specification

Main Content: acrylic resin, natural sand, additive and water
TouchDry Time: ≤4 hrs (standard climate condition)
Recoating Time: 24 hrs (temperature>5℃, Humidity<85%)
Theoretical Consumption: 4-5kg/m2 (note: The dry film thickness is 2mm. The actual consumption is subject to the application wastage and pattern variety)

Application Condition

  • Highly close appearance to natural stone

  • Wide application scope to apply multiple façade constructions 

  • Anti-fade, durable with more than 10 years serving life

  • Anti-corrosion, water-repelling, anti-alkaline and anti-stain

  • Ideal flexible paint film can cover tiny crack on wall surface

  • Energy-saving and environmental-friendly, it is and alternative to natural stone decoration

  • Reduce structural capacity by 70%

  • Secure and no falling risk

  • High competitive price, only 10~20% of real stone cost

  • Easy application and maintenance

Effect Expression

Application System

Application Technology

Notification

  • Product shall be sealed at place, where is clean, dry, cool, non-frozen between 5℃ and 35℃ and is away from rain and sun.

  • Application requirements: substrate should be firm, strong, dry, flat, and clean, no dirt or grease.

  • Putty layer checking: check the moisture content (≤10%) and pH (≤10) of putty layer before applying primer.

  • Ambience requirement: temperature≥5 ℃; Humidity<85% 

  • Evenly apply Primer/sealer to cover substrate completely.

  • DO NOT tint the primer to black to replace marking paint.

  • Finely stir before use, mix with water (≤5%) if needed.

  • Touch dry time: ≤4 hrs; Recoating time: 24 hrs 

  • Sample shall be carefully checked to confirm the color. An entire wall shall apply the same batch product to avoid color difference. 

  • Same wall application shall maintain the same equipment pressure, application method and film thickness to avert cracking, uneven cover, color difference, floating etc.

  • DO NOT apply in the inclement weather.

  • Clean application tools after use with water.

Project case

厦门云顶别墅

塞纳左岸

More cases+
Top